Technical Data | BM/P Series Acoustic Barrier Mat | Interiors | Products | Siderise

Siderise BM/P Series Acoustic Barrier Mat – Technical Data

Version: 1.00 - Release Date: July 2014

Application

SIDERISE BM/P series barrier mat: BM/Px is a thin, bitumen free polymeric sound barrier offering exceptional flexibility.  

The product is used in many varied applications and industries including construction, marine, automotive, and OEM. Some applications use the product as a component layer within a bespoke SIDERISE composite material. The barrier is then optionally combined with sound absorbents, spacing layers, facings and self-adhesive backings. 
 
Common construction applications include: high performance wall and partition constructions; external cladding to ducts/ pipes; component in built up metal roof and cladding systems.

Product Description

Combining a high surface mass with ‘limp’ mechanical characteristics, SIDERISE BM/P series barrier mat: BM/Px offers optimum sound reduction and dampening performance. 
 
Primarily designed to improve the sound insulation value of existing panels of metal, wood, plastic, GRP, etc. It is particularly effective in reducing the effect of coincidence dip resonance found in these stiff, lightweight materials. 
 
Additionally SIDERISE BM/P series barrier mat: BM/Px may be used: in sandwich constructions between boards materials or as an internal membrane in built up composites where final flexibility is required. The product is clean & simple to use and can be readily cut to size with a sharp knife.  
 
SIDERISE BM/P series barrier mat: BM/Px can be used in multiple offset layers which both increases the total applied mass and negates the normal requirement for overlap joints to maintain acoustic integrity

Environmental

SIDERISE BM/P series barrier mat: BM/Px are environmentally friendly. 
  • They contain no Volatile Organic Compounds (VOCs) and no very Volatile Organic Compounds (vVOCs) 
  • Zero Ozone Depleting Potential 
  • Global Warming Potential of less than 5 
  • Recyclable

Additional Information

The following information is available upon request or via download from the website:  
  • NBS Specification Clause 
  • Safety Data Sheet

Technical Support

For further information please contact our Interiors technical team at the address below.

Context

The information in this datasheet is believed to be accurate at the date of publication. SIDERISE has a policy of continuous product improvement and reserves the right to alter or amend the specifications of products without prior notice. SIDERISE does not accept responsibility for the consequences of using the products described outside of the recommendations within this datasheet. Expert advice should be sought where there is any doubt about the correct specification or installation of SIDERISE products.

 
Siderise Group, Forge Industrial Estate, Maesteg, UK, CF34 0AY T: +44 (0)1656 730833 | F: +44 (0)1656 812509 | interiors@siderise.com | www.siderise.com

 
 
Published Version: BM Px_v1_20200529_1052