CVB/P10 Acoustic Void Barrier for ceilings and floors

Siderise CVB/P10 acoustic void barriers are primarily intended to reduce sound transmission via hidden voids offering potential ‘cross-talk' paths to adjoining areas. For suspended ceilings or raised access floors, typical voids include those formed at partition lines.

The product can be cut to accommodate service penetrations.

Siderise CVB/P10 is a bonded composite comprising a central 10kg/m² polymeric membrane with high density mineral wool either side. The mineral wool is faced as standard on the exposed surfaces with a reinforced aluminium foil.

As standard is supplied with opposing interlocking rebate joints in one direction. This feature helps maintain acoustic performance at joints between adjacent slabs.

Handling

Siderise CVB/P10 weighs 18kg/m², care should be taken when handling to protect the product from damage and the handler from personal injury.

In terms of 'Reaction to Fire', the products are classified to EN 13501-1. See Table 1.

The product’s acoustic performance is tested in accordance with BS EN ISO 10140-2:2021. Weighted sound reduction index (dB Rw) values for various grades of the product are given below in Table 2.

Products available
The following Siderise Building Acoustics products are available:

•    Siderise ALS acoustic lining slab
•    Siderise AVC acoustic void closures for tops of walls 
•    Siderise BM/P10 series barrier mat
•    Siderise CBX flexible acoustic barriers
•    Siderise CVB/LAM acoustic barriers for suspended ceilings
•    Siderise CVB/P10 acoustic barriers for suspended ceilings and raised access floors
•    Siderise FIP façade interface panel
•    Siderise FLX foam based flexible acoustic barriers
•    Siderise MC mullion cover
•    Siderise MI Mullion/Transom Inserts
•    Siderise RF Cavity Barrier and Firestop for Raised Access Floors

Contact us for a copy of our building acoustics range brochure.
Contact us for further information on our CPDs
 

Technical & Sales support

For further information and advice,  please contact:

Technical support: Technical Team,+44(0)1473 827695, [email protected]

Sales support: Internal Sales Team ,+44(0)1473 827695, [email protected]
 

The information in this datasheet is believed to be accurate at the date of publication. Siderise has a policy of continuous product improvement and reserves the right to alter or amend the specifications of products without prior notice. Siderise does not accept responsibility for the consequences of using the products described outside of the recommendations within this datasheet. Expert advice should be sought where there is any doubt about the correct specification or installation of Siderise products.